SIGN UP FOR OUR NEWSLETTER AND GET A 15% DISCOUNT!

Menu
0

SIGN UP FOR OUR NEWSLETTER AND GET A 15% DISCOUNT!

    0

    Your Cart is Empty

    • Login

    real estate sign lights

    real estate sign light plus

    real estate sign light-SINGLE SIDE

    accessories

    Work-Site Security System
    The Worksite Hawk travels with the camera detached and secured inside the vehicle (attaches to the top of the mast). The solar panel is securely latched in place.
    This closer picture provides a better view of the trailer, including solar panel, mast winch, outrigger jacks. The standard trailer color of safety orange is shown but custom colors are also available.
    The solar panel is shown in full upright position. This is used for access to the battery box which houses two AGM no-maintenance batteries, 110-220 volt battery charger and other essentials. By the way, the battery charger serves two purposes: first to pre-charge the batteries before deployment and second as an optional power source when not set up at a remote location.
    This is the backside of the solar panel. You can see the bracket used to set the solar panel to the optimum angle for your region to maximize exposure to the sun. Also shown is a gas shock. We use a pair of gas shocks on the solar panel as well as a pair of gas shocks on the battery lid. These gas shocks assist in the lifting and provide stability.
    Here you see the rear view of the Worksite Hawk trailer. You can see the rear outriggers and drop leg jacks that extend to provide stability. You can also see that there is a rear receiver hitch and wiring that allows the trailer to be towed in tandem.
    Front view of the road construction set up. The last step is to raise the camera with the telescoping mast.
    Road construction view of the Worksite Hawk almost completely set up. Outriggers provide stability.
    The winch is used to raise and lower the three stage mast. Wires for the electronics at the top of the mast are enclosed and fed from inside the battery box.
    The Worksite Hawk video camera shown in the protective, heat-controlled case before the mast is extended. The cellular modem and technology is protected from the elements. The antenna is mounted for securing the maximum signal available.
    The Worksite Hawk video camera is shown approximately 19 feet high on the mast. During the daytime the camera can pan 360 degrees as well as tilt and zoom – ideal for monitoring workers and materials on the jobsite. At nighttime the camera provides security by monitoring a predetermined area of equipment and materials. Real time notifications are sent via email or text through video analytics (and footage is saved for six months). Free initial software and setup is provided as well as ongoing support. It is
    The fold away hitch makes it compact for easier storage. The footprint is sized for optimum shipping.
    Residential construction site with the Worksite Hawk set up curbside. The best way to learn about the Worksite Hawk is to call us at 305-290-2299 x. 708. Give us a call for a no pressure chat about how your company can enhance your worksite security and jobsite productivity monitoring. Hablamos Español!
    Work-Site Security System
    The Worksite Hawk travels with the camera detached and secured inside the vehicle (attaches to the top of the mast). The solar panel is securely latched in place.
    This closer picture provides a better view of the trailer, including solar panel, mast winch, outrigger jacks. The standard trailer color of safety orange is shown but custom colors are also available.
    The solar panel is shown in full upright position. This is used for access to the battery box which houses two AGM no-maintenance batteries, 110-220 volt battery charger and other essentials. By the way, the battery charger serves two purposes: first to pre-charge the batteries before deployment and second as an optional power source when not set up at a remote location.
    This is the backside of the solar panel. You can see the bracket used to set the solar panel to the optimum angle for your region to maximize exposure to the sun. Also shown is a gas shock. We use a pair of gas shocks on the solar panel as well as a pair of gas shocks on the battery lid. These gas shocks assist in the lifting and provide stability.
    Here you see the rear view of the Worksite Hawk trailer. You can see the rear outriggers and drop leg jacks that extend to provide stability. You can also see that there is a rear receiver hitch and wiring that allows the trailer to be towed in tandem.
    Front view of the road construction set up. The last step is to raise the camera with the telescoping mast.
    Road construction view of the Worksite Hawk almost completely set up. Outriggers provide stability.
    The winch is used to raise and lower the three stage mast. Wires for the electronics at the top of the mast are enclosed and fed from inside the battery box.
    The Worksite Hawk video camera shown in the protective, heat-controlled case before the mast is extended. The cellular modem and technology is protected from the elements. The antenna is mounted for securing the maximum signal available.
    The Worksite Hawk video camera is shown approximately 19 feet high on the mast. During the daytime the camera can pan 360 degrees as well as tilt and zoom – ideal for monitoring workers and materials on the jobsite. At nighttime the camera provides security by monitoring a predetermined area of equipment and materials. Real time notifications are sent via email or text through video analytics (and footage is saved for six months). Free initial software and setup is provided as well as ongoing support. It is
    The fold away hitch makes it compact for easier storage. The footprint is sized for optimum shipping.
    Residential construction site with the Worksite Hawk set up curbside. The best way to learn about the Worksite Hawk is to call us at 305-290-2299 x. 708. Give us a call for a no pressure chat about how your company can enhance your worksite security and jobsite productivity monitoring. Hablamos Español!

    enlogik

    Work-Site Security System

    $24,995.99

    Work-Site Hawk is a self contained autonomous video surveillance and monitoring solution specifically designed for the construction, roadside and event security industries.

    WORK-SITE MONITORING:  Monitor work progress, employees and material deliveries
    SECURITY AT THE WORK-SITE:  Automated 24 hour security with long term recording
    VIDEO ANALYTICS:  Sends text and/or email at the moment of intruder detection
    AUTONOMOUS OPERATION:  Complete 24/7 off-grid Solar operation
    WIRELESS:  Full Control over Cellular and WiFi with full motion video support

    Solar Powered 24/7 operation
    AGM No-maintenance Batteries
    PTZ Camera with Video Analytics
    Allows Work-site Monitoring
    Smart Phone and Tablet Compatible
    Mast wiring is enclosed
    Lockable and drop leg jacks
    Compact for storage and shipping
    Outriggers for stability
    Telescoping Mast
    On-board Battery Charger
    Can Tow in Tandem

    *Rental rates available upon request